More, faster and more worry-free
FF-M140C
Take you to unlock the new posture of dental efficient production
· 180-200 tooth for about 6 hours.
· Utilization rate of powder: one kilogram of powder can print about 480 ordinary crowns.
· The crown veneer can complete typesetting and data processing in 5 minutes at the fastest.
· Simple interface, easy to learn and operate.
Building volume | 140mm×140mm×100mm |
Hot bed temperature（only for industry） | 200℃ |
Forming accuracy | All dimensional errors within 100mm are less than ±0.05mm, and dimensional errors above 100mm are less than 0.05%. |
Powder spreading method | Unidirectional flexible scraper |
Printable material | Cobalt-chromium alloy, titanium alloy, stainless steel, die steel, aluminum alloy and other metal materials. |
Maximum power | 5KW |
Power supply type | 380V three-phase NPE |
Laser type | Fiber laser |
Laser power | 500W |
Scanner type | High-precision |
Spot size | 20-60μm |
Scanning speed of galvanometer | 0-7m/s |
Scanning mode | One-way scanning, chessboard scanning, strip scanning, etc. |
| Scan system | Repeatability (2urad) Linearity 99.9%, Range ±20%, Ratio drift Shift:8PPM/℃ |
| Gas protection system | 0-2m³/min, multi-layer air curtain protection |
| Oxygen sensor configuration | Equipment working oxygen content ≤100 ppm adjustable |
| Laser power requirements | 10%-100% continuously adjustable |
Gas shield | Argon, nitrogen |
CONTACT US
If you have any questions, please call at any time to learn more about the us. FastForm will provide you with the best service to meet your needs!
WeChat official accounts